During the manufacturing process of wood pallet manufacturers, sometimes there is lining blackening, which has a certain impact on the quality and performance of products, so corresponding measures need to be taken to prevent and avoid it. How to deal with it?

　　為了避免木托盤的內層發(fā)黑現象，我們需要了解發(fā)黑溶液的不同配比和濃度會影響發(fā)黑膜產生的密度和顏色均勻性。制造商可以從這方面入手。此外,預浸材料軟化溫度也有一定的影響,所以半固化片的溫度可以提高到大約30到40度,值得一提的是,在室溫下,這可以有效地保證的顏色均勻性軟化板表面,以減少色差不均勻造成的成熟的顏色。

　　In order to avoid the blackening of the inner layer of the wooden pallet, we need to understand that the different proportion and concentration of the blackening solution will affect the density and color uniformity of the blackening film. Manufacturers can start with this. In addition, the softening temperature of the prepreg also has a certain impact, so the temperature of the prepreg can be raised to about 30 to 40 degrees. It is worth mentioning that at room temperature, this can effectively ensure the color uniformity of the softened plate surface, so as to reduce the mature color caused by the uneven color difference.

　　另外，托盤廠家還可以通過對罐內流體的分析和微蝕厚度的測量來控制微蝕厚度，使生產的板材不出現發(fā)黑現象，以保證板材的應用效果。

　　In addition, tray manufacturers can also control the micro erosion thickness through the analysis of the fluid in the tank and the measurement of the micro erosion thickness, so that the produced plate does not appear blackening phenomenon, so as to ensure the application effect of the plate.